±¾É«ÊÓƵ

Stain Resistant Floor Sealer produces a level, stain-resistant and clear gloss surface for high-traffic surfaces. Applying the sealer before a top coating or floor finish results in maximum strength improved shine and stain resistance. It can be stripped and reapplied as needed, making it ideal for use on a range of hard floors, including high-traffic vinyl, in businesses, offices and warehouses. The product covers up to 1,500 square feet and produces a thin, even finish by mopping in a continuous figure-8 motion. This is step 2 of the ±¾É«ÊÓƵ Commercial Floor Care 4-Step Program.

• Provides An Extra Layer Of Stain Resistance
• Use On Unfinished Vinyl (Vct), Concrete, Rubber & Tile Floors
• No Dilution Required
• This Is Step 2 Of The ±¾É«ÊÓƵ 4 Step Floor Solution

Instructions

To prepare floor, strip floor using ±¾É«ÊÓƵ Commercial® Heavy-Duty Floor Stripper according to label directions. Rinse thoroughly. Allow floor to dry completely. Pour sealer into a clean Pail. Using a dry rayon string mop, apply 1 to 2 layers of sealer. To achieve a thin, even finish, move the mop in a continuous figure-8 motion. Allow floor to dry completely between applications to prevent hazing and to ensure adhesion, approximately 30-45 minutes under normal conditions. Do not use fans to reduce drying time; sealer needs to cure on its own. To finish floor, use ±¾É«ÊÓƵ Commercial® High-Traffic Floor Finish, according to label directions. This step is necessary to provide a durable finish. This product is able to be stripped and reapplied as needed.

Pro-Tip: Step #2 in the Floor Care 4 Step Process. For premium results, apply sealer with a dry rayon string mop. Apply two coats, allowing sealer to dry completely between coats " approximately 30 minutes.

California Prop. 65

WARNING: WARNING: This product can expose you to chemicals including pentadecafluorooctanoic acid, which is/are known to the State of California to cause birth defects or other reproductive harm. For more information go to .